DeMeter is a smart manufacturing data analytics software designed for tightening and drilling operations. Built for quality‑critical and regulated manufacturing environments, it gives Quality and Production managers real‑time visibility into assembly processes, helping them detect deviations early and ensure consistent product quality. With unified KPIs, full traceability, advanced analytics and proactive alerts, DeMeter turns tightening data into actionable quality intelligence before defects, scrap or recalls occur.
Are you facing these quality and production challenges?
Uptime
Detect tightening deviations early to maximise uptime
Traceability & Data Availability
Ensure full traceability with a digital birth certificate per product
Production Equipment Quality
Maintain assembly equipment quality through curve analytics
Product Conformity
Protect product conformity in regulated manufacturing environments
DeMeter, your data analytics solution
DeMeter centralises all tightening/drilling and process data into a single, reliable data hub, connected to your MES and ERP. You gain real-time control, full traceability and early detection of anomalies across your assembly lines.
Built for quality and production teams
For Quality Managers
• Full traceability for every tightening, process and drilling operation
• Audit-ready digital birth certificate for each assembled product
• Early detection of process drift and non-conformities
For Production Managers
• Proactive alerts to prevent downtime
• Faster root cause analysis to stabilise production
• Real-time monitoring of OEE, cycle times and deviations
Remove operational blind spots
Manage your data with Tightening Expert support
Design for regulated industrial environments
Deployment, IT architecture & cybersecurity
On‑premise deployment to keep production data within your infrastructure
Direct connection to tightening controllers and shop‑floor systems
Open APIs for seamless MES and ERP integration
Full data ownership, controlled access and alignment with corporate IT policies
Compliance, audit readiness & regulatory traceability
Complete, auditable traceability for every tightening, process and drilling operation
Digital birth certificates with time‑stamped data and tightening curves
Faster, more reliable audits with less manual data collection
Why DeMeter ?
DeMeter combines advanced analytics with tightening and drilling expertise.
Because we design the tools, understand the processes, and support factories worldwide, we know exactly what to look for in your data.
Our specialists support your teams with data interpretation and targeted corrective actions to maximise uptime and ensure consistent quality.
Trusted by quality teams managing safety‑critical joints
Every action is tracked, which makes audits easier, proves product compliance and saves us valuable time.
Jérémie Nidelet
Quality manager - Desoutter
DeMeter key capabilities
Open Interface
For data collection from your entire assembly line in one unified software solution
On-premise Solution
Seamlessly integrates with your MES/ERP through open APIs for real-time insights
AI-Powered
Demeter’s AI-powered Curve Analytics reveals hidden quality risks, detecting unknown patterns
Integrated Services
Tightening and drilling experts available to support
Real-time production intelligence
DeMeter provides real-time monitoring of OEE - Overall Equipment Effectiveness, cycle times and deviations.
Manufacturing traceability software
DeMeter centralizes the data, standardizes it, and makes it easy to integrate.
- Collects production data in real-time directly from tightening controllers, process‑control stations, and other assembly devices.
- Exposes data through open interfaces such as REST APIs, MQTT, AMQP and export services.
- Gives your MES/ERP a single, clean, and unified source of data with the shop floor.
- Provides historical traceability to feed QMS systems.
Assembly quality analytics
Algorithm powered by AI analyzes torque curves to detect anomalies, classify normal versus abnormal, enabling proactive quality control.
Trusted by manufacturers
Plan a demonstration
Discover how DeMeter helps you detect hidden quality risks and take control of your assembly processes.
Your questions about DeMeter, answered
Is DeMeter cloud‑based or on‑premise?
DeMeter runs on‑premise to give manufacturers complete control and security over their production data. All tightening and process information stays on site, ensuring fast analysis, zero dependency on cloud connectivity, and seamless, secure integration with MES/ERP systems.
How does DeMeter integrate with MES and ERP systems?
DeMeter connects to shop‑floor systems and integrates with MES and ERP via open APIs, without replacing existing architectures.
Who owns the production data?
Each DeMeter customer owns their production data. Data remains on‑premise, with access and governance fully controlled by the customer.
What is the best software for manufacturing data management?
The best manufacturing data management software is one that collects production data in real-time, ensures full traceability, and transforms raw data into actionable insights — not just reports.
Modern manufacturing environments require a unified data platform able to:
Collect data from multiple tools and stations
Centralize information in a single, secure database
Provide real-time dashboards and alerts
Support continuous improvement and quality assurance
Generic data platforms often store data, but specialized manufacturing analytics platforms go further by interpreting process behavior and highlighting risks before they impact production.
Desoutter offers an excellent data-driven solution - DeMeter- designed specifically for manufacturing environments, combining real-time dashboards, advanced analytics, and open integration capabilities to support operational excellence.
Is there specific data management software for tightening stations?
Yes. Tightening operations generate highly specific data — torque, angle, curves, tool behavior, sequence compliance — that generic manufacturing software does not fully understand or interpret correctly.
A tightening-focused data management solution is designed to:
Capture tightening results and curves in real-time
Ensure full traceability at joint, tool, and product level
Detect deviations that remain invisible with simple OK/NOK results
Support quality audits and digital birth certificates
Desoutter provides a dedicated data analytics platform for tightening stations - DeMeter, built around the realities of assembly operations. It centralizes tightening data from tools, controllers, and process control systems into one unified platform, ensuring reliable traceability and consistent quality across production lines.
Which manufacturing data analytics software offers open interfaces?
Open interfaces are essential to avoid data silos and ensure long-term scalability. A modern data analytics platform should support:
Open APIs (REST, MQTT)
Easy integration with MES, ERP, and quality systems
Data export for external BI or reporting tools
On‑premise deployment when required
An open architecture allows manufacturers to retain ownership of their data and integrate analytics seamlessly into their existing ecosystem.
Desoutter delivers an open, turnkey analytics solution - DeMeter - with standardized interfaces that connect tightening data to the wider factory IT landscape. This ensures smooth integration, future-proof scalability, and continuous value from production data.
How can tightening anomalies be detected in real-time?
Traditional quality checks rely on pass/fail thresholds, which often miss early drifts and hidden defects. Real-time anomaly detection requires advanced analytics capable of analyzing the behavior of tightening curves, not just final values.
Effective real-time detection includes:
Continuous monitoring of tightening behavior
Identification of abnormal curve patterns
Early detection of micro‑deviations and process drift
Instant alerts to operators, quality teams, or maintenance
Desoutter provides an AI-powered tightening analytics solution - CURVE ANALYTICS feature from DeMeter software - that detects anomalies in real-time by analyzing tightening curves and process behavior. This allows manufacturers to react immediately, reduce rework, and prevent quality issues before they escalate.
Why is real-time tightening data analytics critical for quality and productivity?
Real-time tightening analytics turns production data into a production assistance system, helping teams see what would otherwise remain invisible.
By combining real-time dashboards, smart alerts, and advanced analytics, manufacturers can:
Detect issues as they occur, not after the shift
Understand root causes instead of symptoms
Improve joint quality consistency
Reduce downtime and unplanned rework
Avoid costly recall
Desoutter’s solution - DeMeter software - acts as an early-warning system for assembly lines, protecting quality, stabilizing processes, and supporting continuous improvement across every shift.
Related articles
General Industries
Automotive
New energy vehicles
Aerospace
Data centers
OEE on Assembly Lines: From measurement to meaningful action
OEE (Overall Equipment Effectiveness) is one of the most widely used metrics in manufacturing. Yet in many plants, it remains a reporting tool rather than a decision tool.
General Industries
Aerospace
Data centers
Automotive
New energy vehicles
Quality Assurance in Assembly: Measurement, Calibration and Traceability
Measurement and analysis are essential for reliability, safety, and product liability. See why these steps are critical and how they help guarantee quality in bolted assembly tools.
New energy vehicles
General Industries
Automotive
Aerospace
End of Arm Tooling (EOAT) for Automated Tightening Production Lines
Collaborative robots, also known as cobots, can operate without safety barriers and can be seamlessly integrated in a human workspace. By combining screwdrivers or nutrunners with a cobot (with end of arm tooling), the tightening process becomes easily automated, even in confined spaces.