Part of Desoutter product portfolio, SETITEC line offers best-in classe performance, quality and reliability for the most demanding drilling applications worldwide. SETITEC solutions have already been adopted by all major Aircraft manufacturers worlwide. This concept is dedicated to highly demanding drilling, reaming, countersinking applications, where quality, precision and repeatability are critical. Its innovative design make one step drilling, reaming, countersinking possible, and will help driving down your cycle time. Its design based on modularity concept and the wide variety of clamping options
Vibratory drilling options
Various lubrication options
Spindle return button
Wide range of equipements
Vacuum system
Wide range of equipments
Start button
Low maintenance oil-free turbine motor
Emergency stop button
Cycle counter
Air inlet
Key Points
Production optimization
Cycle time optimization (one shot drilling, application expertise)
Compatible with all aerospace cutter manufacturers
Compactness: Wide range of solutions for limited access applications
Modular system for easy tool configuration
On-board lubrication system
Quality control
High precision for tight hole tolerances
Fixed Feed and rotation speed parameters for higher process control
No operator dependence
Controlled chip evacuation with vibratory drilling option
High capability levels for countersink drilling
Health & safety
Lightweight tool
Ergnomics
Lubrication optimization system
Maintenance optimization
Low maintenance
Modular range for spare part standardization
Full service offer to suit customer need
Technical information
Type:
Automatic positive feed drill
Drill and countersink, precision depth 0.02mm
ST1200
ST2200
Power:
2.8 HP, with torque limiter at lower speed
Weight:
1.5 kg (3.3lb)
4.2 kg (9.2lb)
Stroke:
Unlimited
Unlimited
Feed rate:
0.02 mm/rotation
0.04 mm/rotation
0.04 mm/rotation
0.06 mm/rotation
0.06 mm/rotation
0.10 mm/rotation
0.08 mm/rotation
0.12 mm/rotation
0.10 mm/rotation
0.14 mm/rotation
0.12 mm/rotation
0.18 mm/rotation
0.15 mm/rotation
0.20 mm/rotation
Upper feed rates possible to adapt.
Rotation speed:
240 rpm
159 rpm
500 rpm
250 rpm
1000 rpm
300 rpm
1700 rpm
540 rpm
2400 rpm
700 rpm
3000 rpm
800 rpm
4600 rpm
900 rpm
6500 rpm
1200 rpm
8100 rpm
2600 rpm
14000 rpm
3000 rpm
Available an right angle, inline and inline + handle
hole diameter
aluminium composite
titanium hard metal
aluminium
titanium
Straihgt hole
Countersink hole
<4,8mm - 3/16"
ST 1200
ST 1200
ST 1200
ST 1200
<6,35mm - 1/4"
<7,9mm - 5/16"
<9,5mm - 3/8"
<11,1mm - 7/16"
<12,7mm - 1/2"
ST2200
<14,3mm - 9/16"
ST2200
ST2200
<15,9mm - 9/16"
<19,5mm - 5/8"
ST 2200
<22,2mm - 3/4"
<25,4mm - 1"
Over 25,4mm - 1"
cocentric collet
bayonet 1/4 turn
croco clamp
jack clamp
template foot
crowfoot
thick jig
ST1200 ST2200
Thick jig with rail or srews
ST1200 ST2200
ST1200 ST2200
Thick jig
ST1200
ST1200
ST1200
No jig (pre-hole)
ST1200
ST1200
ST1200
Pneumatic Advanced Drilling Units ADU (4)
Discover all our Pneumatic Advanced Drilling Units ADU products by Desoutter Industrial Tools. Find the complete range of Pneumatic Advanced Drilling Units ADU products and contact Desoutter Industrial Tools for a quote or a demonstration.