Q-SHIELD 200-C
Q-Shield 200-C-Digital Smart Wrench Wi-Fi-20 to 200 Nm
Q-SHIELD 200-C Technical Description
| Part Number | 6159352020 |
|---|---|
| Feedback type | RGB Backlight wrench display and handle Vibration |
| Lever arm length | 552 mm |
| Compliance | ISO 6789:2017 |
| Min torque | 20 Nm |
| Tightening strategies | Yes |
| Drive (mm) | 14x18 |
| Quality strategies | Yes |
| Battery type | Lithium-ion |
| Drive (in) | 0.55x0.71 |
| Power supply | 3500 mAh Battery |
| Output drive type | Sq |
| Accuracy (ID accuracy_measurement tool) (%) | ±1% on torque reading value from 10% to 100% of nominal torque (CW and CCW) |
| Side to Center | 22.5 mm |
| Min torque | 14.8 ft.lbf |
| Autonomy (h) | 8h connected/10h in standalone |
| Weight | 1.68 kg |
| Battery capacity | 3.5 Ah |
| Overload torque | 177 ft.lbf |
| Max torque | 148 ft.lbf |
| Unit measurement supported | N.m, lbs.ft, lbs.in, oz.ft, oz.in, kgf.m, kgf.cm, k.pm, d.Nm, degree |
| Output drive size (in) | 1/2 |
| Family | Manual torque wrenches |
| Length without ratchet | 627 mm |
| Subfamily | Digital torque wrenches |
| Tightening direction | CW and CCW |
| Type class | Type I, Class 3 |
| Angle accuracy (%) | 1% from 3°/s to 250°/s angular speed (2,5% from 1,2° to 3°/s) |
| Max Ambient Operating Temperature | 60 °C |
| Curves memory capacity | 25 |
| Communication type | WIFI 2.4 & 5 Ghz - IEEE 802.11a/b/g/n |
| Communicating | Yes |
| Results memory capacity | 1000 (99 on display) |
| Overload torque | 240 Nm |
| End-fitting management | Yes |
| Angle measure | Yes |
| Max torque | 200 Nm |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
