Get your product information
Enter your product Serial Number and get information about maintenance and key dates.
Whether your process require manual tightening operation, torque checking or quality check operation, with or without full reporting , the Desoutter QShield digital wrench is designed to to error proof your operation. The robust features a long life Li-ion battery, gyroscope, Yield detection and a double bridge strain gauge to provide full traceability, irrespective of the operator or process.
This product is a part of Q-Shield C digital wrench
Identification
Feedback type
RGB Backlight wrench display and handle Vibration
Lever arm length
320 mm
Compliance
ISO 6789:2017
Min torque
3 Nm
Tightening strategies
Yes
Drive (mm)
9x12
Quality strategies
Yes
Battery type
Lithium-ion
Min Ambient Operating Temperature
-10 °C
Drive (in)
0.35x0.47
Power supply
3500 mAh Battery
Output drive type
Sq
Battery capacity
3.5 Ah
Accuracy (ID accuracy_measurement tool) (%)
±1% on torque reading value from 10% to 100% of nominal torque (CW and CCW)
Side to Center
22.5 mm
Autonomy (h)
8h connected/10h in standalone
Weight
0.78 kg
Battery capacity
3.5 Ah
Unit measurement supported
N.m, lbs.ft, lbs.in, oz.ft, oz.in, kgf.m, kgf.cm, k.pm, d.Nm, degree
Output drive size (in)
3/8
Length without ratchet
402 mm
Subfamily
Digital torque wrenches
Tightening direction
CW and CCW
Type class
Type I, Class 3
Angle accuracy (%)
1% from 3°/s to 250°/s angular speed (2,5% from 1,2° to 3°/s) %
Max Ambient Operating Temperature
60 °C
Curves memory capacity
25
Communication type
WIFI 2.4 & 5 Ghz - IEEE 802.11a/b/g/n
Communicating
Yes
Results memory capacity
1000 (99 on display)
Overload torque
36 Nm
End-fitting management
Yes
Angle measure
Yes
Max torque
30 Nm
Resources
Find technical documentations and documents relative to this product
3D / CAD Files
Product instructions
Compliance
